Codan 8525B Series, Handbook

Page: 123 / 189

Making a telephone interconnect call
9-8 Outback HF Radiophone
Storing a telephone number
This facility allows you to store up to 10 telephone numbers into your Radiophone,
which can be re-called by entering a single code number (0 to 9) rather than a
complete telephone number.
Ensure your Radiophone is switched on and a selective call enabled channel has been
selected before commencing this procedure. If you make an error and wish to re-start
this procedure (such as entering an incorrect number), just press the Select Channel
button.
Step Action… Display shows… Remarks…
1.
Press
Call
Selective
You must start the next
action within 60 seconds.
2. Use the numeric
buttons to enter
the required
selective call
address. This is the self
identification number of
the base IPC-500
telephone interconnect
you are using. See
section 5, Using selective
call.
3. Press
Enter
4. Use the numeric
buttons to enter
the telephone
number you wish
to store. This example number is
08 336 0311. (Numbers
wrap around in the
display from the bottom
to the top row, including
the call area.)
F