5
After Sales Support
1300 663 907
Model Number
HE150272
Warranty Details
The product is guaranteed to be free from defects in workmanship and parts for a period
of 12 months from the date of purchase. Defects that occur within
this warranty period,
under normal use and care, will be repaired, replaced or refunded at our discretion.
The benefits conferred by this warranty are in addition to all rights and remedies in respect
of the product that the consumer has under the Competition and Consumer Act 2010 and
similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law.
You are entitled to a replacement or refund for a major failure and for compensation
for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
AFTER SALES SUPPORT
YEAR
WARRANTY
1
1300 663 907
AUS
3D Printer
MODEL: HE150272 PRODUCT CODE: 52914 02/2016
create
Safety Instructions
Before you get started, please read these important safety instructions.
CAUTION: The Cocoon Create 3D Printer generates high temperatures and includes moving parts
that can cause injury. Never reach inside of the Cocoon Create 3D Printer while it is in operation,
and allow time for the printer to cool down after operation.
Vapours/fumes may be irritating at operating temperatures. Always use the Cocoon
Create 3D Printer in an open, well ventilated area.
Do not leave the Cocoon Create 3D Printer unattended during operation
Contact with extruded material may cause burns. Wait for printed objects to cool before
removing them from the build platform.
Always take care when using the Scraper. Never direct the Scraper towards your fingers.
• The printer must not be exposed to water or rain, or damage will occur.
• The printer is designed to be used with ambient temperature ranging 15°C - 30°C, and humidity
ranging 20% - 50%. Operating outside these limits may result in low quality models.
• In case of emergency, turn off the 3D printer at the power outlet.
• It is recommended that you use eye protection when cleaning/sanding printed models to avoid
small particles contacting eyes.
HOT SURFACE
MOVING PARTS
.
Summary of Contents for HE150272
