30
After Sales Support
1300 663 907
Model Number
HE150272
4.2 Printing from the Micro SD Card:
1. Insert the included MicroSD card into the slot on the side of the Control Box, ensuring that
the metal contacts are facing upwards
2. Press the Navigation Dial to enter the menu system
3. Navigate to and select SD Card > Mount Card > Print File
4. Navigate to your desired GCODE File, then press the Dial to commence printing
Your Cocoon Create 3D Printer will now heat up the Extruder and Heated Print Bed before printing
your 3D object
NOTE:
If selecting ‘Print File’ shows no files, chances are the SD Card has not been mounted. Select
‘Unmount SD Card’, then ‘Mount SD Card’ to remount your SD Card into the side of your Control Box
NOTE:
If Extruder temperature is set at 0°C after attempting to print a file, the imported GCODE may
have some compatibility issues with the printer. Manually change the Extruder temperature using
Extruder
>
Temp 1
or
Quick Settings
>
Preheat PLA
or
ABS
depending on material used
5. Removing 3D Objects from the Bed
When the Cocoon Create 3D Printer has completed printing your 3D printed object, it’s time to
remove the object from the bed.
1. Wait until the Extruder and Heated Print Bed have cooled down to room temperature. This
will allow the plastic to contract, making it easier to remove
2. Using the Scraper, carefully ‘wedge’ under one of the edges of the 3D object. Take care to
keep the Scraper flat with the bed, as to not cause damage to the Print Mat
3. As one edge begins to lift, gently manoeuvre the Scraper forward to continue to ‘wedge’
between the 3D object and the Heated Print Bed
4. Once the part has fully separated from the bed, it is safe to remove
NOTE:
Never scrape towards your body, or injury could occur
NOTE:
Removing a 3D object, particularly one with a large surface size, can be a long process. Never
rush when removing a 3D printed object
TIP: If you are persistently having trouble removing 3D printed objects, try the following:
• Use a layer of blue masking tape (designed to not leave behind residue) on the Heated Print
Bed. Be sure to remove and replace after each print
• Check if the printing mat is damaged and replace if needed
Replacement mats can be purchased at store.cocooncreate.com.au
Setup
.
Summary of Contents for HE150272
