Cocoon HE150272 Instruction Manual Download Page 23 | Manualshive

Page: 23 / 60

background image

23

After Sales Support

1300 663 907

Model Number

HE150272

[email protected]

Installation

1.5 Control Panel

1.5.1 Main Display

Extruder Temperature: (Current °C / Set °C)
Print Bed Temperature: (Current °C / Set °C)
Extruder Co-ordinates: X, Y, and Z (mm)
Mul: Displays current speed multiplier. Default value is 100%
Buf: Displays current GCODE steps in the buffer
Message Display:

•  Printer Ready: Printer is initiated and awaiting input
•  Idle: Printer currently in idle state
•  Stepper Disabled: Motors are disabled and free to be moved by hand
•  Preheat PLA / Preheat ABS: Extruder and bed temperatures set and active
•  Printing…: 3D Object is being printed, % displayed

Printing Time: Total time spent printing
Filament Printed: Total length of filament fed through the Extruder in metres

1.5.2 Menu Map

Quick Settings:

• Home All: Returns Extruder and bed to home position using stop switches
• Speed Mul.: Default 100%. Motor speed multiplier. Speed of the motor is multiplied by

this rate

• Flow Mul.: Default 100%. Printer flow multiplier. Amount of filament extruded is

multiplied by this rate

•  Preheat PLA: Sets Extruder to 215°C and Heated Print Bed to 60°C
•  Preheat ABS: Sets Extruder to 245°C and Heated Print Bed to 90°C
•  Cooldown: Sets Extruder and Heated Print Bed to 0°C
•  Disable Stepper: Disables all motors so they are free to be moved by hand

.

«
...
21
22
23
24
25
...
»

Summary of Contents for HE150272





























































Reviews:

No comments

Related manuals for HE150272

Brand: Oki Pages: 222

Brand: Oki Pages: 4

Brand: Oki Pages: 160

Brand: Primera Pages: 2

Brand: TP Pages: 10

Brand: Oki Pages: 182

Brand: RHINO Pages: 21

Brand: Yurex Pages: 29

Brand: Daewoo Pages: 37

Brand: Hi-Touch Imaging Technologies Pages: 115

Brand: WOOSIM Pages: 20

ET-M1170 Series

Brand: Epson Pages: 133

Brand: Epson Pages: 150

FX-980 - Impact Printer

Brand: Epson Pages: 27

Brand: Canon Pages: 120

Bubble Jet Pixma iX4000

Brand: Canon Pages: 10

Cassette Module-Y1

Brand: Canon Pages: 40

Brand: Canon Pages: 105

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands