Cocoon HE150272 Instruction Manual Download Page 28 | Manualshive

Page: 28 / 60

background image

28

After Sales Support

1300 663 907

Model Number

HE150272

[email protected]

Setup

Alternative types of PLA
These PLA Alternatives require advanced knowledge of the 3D Printer. Please visit
www.cocooncreate.com.au for details of filament types and parameters.

NOTE:

Only use Cocoon Create Filament with your 3D Printer, using other filaments may damage your

3D Printer and may void your warranty.

3.2 Inserting Filament:

1.  With the printer initialised, press the Navigation Dial to enter the menu system
2.  Navigate to, and select Quick Settings
3.  Navigate to, and select Preheat PLA or Preheat ABS - depending on the material in use
4.  Wait for the 3D printer to automatically return to the home screen, after approximately 15-30

seconds

5. Check the temperature of the Extruder and plate on

the LCD. When the temperatures are within a few
degrees of the target, you are ready to insert the filament

NOTE:

Preheat PLA/ABS will still be shown, even after

temperatures have been reached

6. Carefully insert the included filament sample into the

hole on the Extruder as shown

7. While holding the filament in place with one hand, press

the Dial to enter the menu system

8. Navigate to and select Extruder > Extr. Position.
9. Gently push down on the filament while turning the Dial clockwise. You will feel the filament

being pulled into the Extruder. Continue until a few centimetres have extruded out of the
nozzle

10. Carefully clean the extruded filament off the Heated Print Bed and nozzle

WARNING: Extruder and Heated Print Bed will still be hot

6

.

«
...
26
27
28
29
30
...
»

Summary of Contents for HE150272





























































Reviews:

No comments

Related manuals for HE150272

KXPX2M - HOME PHOTO PRINTER

Brand: Panasonic Pages: 28

Brand: Panasonic Pages: 78

Brand: Panasonic Pages: 4

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 9

Jetwriter KX-CL500

Brand: Panasonic Pages: 32

Brand: Eazao Pages: 50

Brand: TallyGenicom Pages: 310

Brand: TallyGenicom Pages: 330

2006NPC - DocuColor Color Laser

Brand: Xerox Pages: 4

Brand: Xerox Pages: 11

Brand: Xerox Pages: 30

Versant 4100 Press

Brand: Xerox Pages: 68

Brand: Xerox Pages: 4

Brand: Xerox Pages: 4

Versant 2100 Press

Brand: Xerox Pages: 68

Brand: Xerox Pages: 2

Brand: Xerox Pages: 80

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands