Cocoon HE150272 Instruction Manual Download Page 39 | Manualshive

Page: 39 / 60

background image

39

After Sales Support

1300 663 907

Model Number

HE150272

[email protected]

FILAMENT
Diameter (mm)
The filament diameter setting is one of the more important settings. Make sure that you update
this value periodically with your average filament diameter. While your filament may be referred to
as 1.75mm, it is more likely going to be near 1.7mm +/- 0.1mm. You will want this to be an accurate
average, as it will allow your printer to correctly calculate how much filament it is pulling into the
Extruder.

Flow (%)
This controls how much filament your printer is extruding in relation to speed. This setting is
mainly used to adjust for filament density variations. Leave this value at 100% as changing it can
lead to surface quality issues.

6.6.2 Advanced Tab Options

MACHINE
Nozzle Size (mm)
This defines your nozzle size. The slicing engine uses this value
combined with your other settings to determine how quickly
to feed filament into your Extruder. The Cocoon Create 3D
Printer uses a 0.4mm nozzle.

RETRACTION
Speed (mm/s)
Retraction Speed determines the speed at which your
filament is reversed out of the Extruder for travel moves and
when changing direction during printing. We recommend
keeping this set to 40mm/s.

Distance (mm)
Retraction Distance determines how much filament is pulled out of your Extruder on travel moves
and when changing direction. You will want to adjust this depending on temperature settings
and filament type. Higher thermal retaining filaments such as PLA behave better with a longer
retraction distance. Anywhere from 1mm to 3mm is a good starting range.

Using Cura

.

«
...
37
38
39
40
41
...
»

Summary of Contents for HE150272





























































Reviews:

No comments

Related manuals for HE150272

Brand: Olympus Pages: 71

Brand: Magicard Pages: 26

Brand: QMS Pages: 194

Brand: Z Corporation Pages: 4

Brand: Labau Pages: 19

Brand: Ultimaker Pages: 30

Brand: Canon Pages: 34

Brand: Canon Pages: 369

Brand: Evolis Pages: 45

VarioPrint 6180

Brand: Oce Pages: 306

Brand: Geeetech Pages: 52

Brand: Xerox Pages: 70

N2125N - DocuPrint B/W Laser Printer

Brand: Xerox Pages: 335

1900N - B/W Laser Printer

Brand: Kyocera Mita Pages: 286

Delta Rostock mini G2

Brand: Geeetech Pages: 85

Brand: Lexmark Pages: 2

Brand: Bresser Pages: 104

Brand: NEC Pages: 90

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands