background image

Operation

Customer Assistance Warranty

Introduction

27

26

General Specifications 

and FCC License

Customer Assistance

Operation

Nothing 

Comes Close to a Cobra

®

General Specifications 

 

  FRS/GMRS Frequency  

Allocation and Compatibility

Important: 

Please note that Cobra GMRS models with 15 Channels 

may designate different channel numbers for the same frequency.  
For example, a Cobra 15 Channel GMRS model would need to be  
tuned to Channel 11 in order to communicate with a 22 Channel  
GMRS tuned to Channel 15. Please refer to the chart below for  
channel/ frequency number compatibility. 

A =  Channel No. for 22 Channel FRS/GMRS Models

B =  Channel No. for 15 Channel GMRS Models

C = Type of Radio Service

D = Frequency in MHz

E = Power Output

  A 

     C 

E

  1  

1  

FRS/GMRS  

462.5625 

High, Med, or Low 

  2  

FRS/GMRS 

462.5875 

High, Med, or Low

  3  

FRS/GMRS  

462.6125 

High, Med, or Low 

  4  

4  

FRS/GMRS  

462.6375 

High, Med, or Low 

  5  

5  

FRS/GMRS  

462.6625 

High, Med, or Low 

  6  

6  

FRS/GMRS  

462.6875 

High, Med, or Low  

  7  

7  

FRS/GMRS  

462.7125 

High, Med, or Low 

  8    FRS  

467.5625 

Low 

  9    FRS  

467.5875 

Low

  10    FRS 

467.6125 

Low 

  11    FRS  

467.6375 

Low

  12    FRS  

467.6625 

Low

  13    FRS  

467.6875 

Low 

  14    FRS  

467.7125 

Low

  15  

11  

GMRS  

462.5500 

High, Med, or Low 

  16  

8  

GMRS  

462.5750 

High, Med, or Low 

  17  

12  

GMRS  

462.6000 

High, Med, or Low 

  18  

9  

GMRS  

462.6250 

High, Med, or Low 

  19  

13  

GMRS  

462.6500 

High, Med, or Low 

  20  

10  

GMRS  

462.6750 

High, Med, or Low 

  21  

14  

GMRS  

462.7000 

High, Med, or Low 

  22  

15  

GMRS  

462.7250 

High, Med, or Low 

IMPORTANT NOTICE: FCC LICENSE REQUIRED 

This two-way radio operates on GMRS (General Mobile Radio Service) frequencies 
which require an FCC (Federal Communications Commission) license. A user must be 
licensed prior to operating on Channels 1 through 7 on high power or 15 through 22, 
which comprise the GMRS channels of this radio. Serious penalties could result for 
unlicensed use of GMRS channels, in violation of FCC rules. Operation of this radio is 
subject to additional rules specified in 47 C.F.R. Part 95. 
Licensed users will be issued a call sign by the FCC, which should be used for station 
identification when operating this radio. GMRS users should also cooperate by engaging 
in permissible transmissions only, avoiding channel interference with other GMRS users, 
and being prudent with the length of their transmission time. 
For licensing information and application forms, please call the FCC Hotline at 800-
418-FORM. Request form #159 and form #605. Questions regarding the license 
application should be directed to the FCC at 888-CALL-FCC. Additional information is 
available on the FCC’s website at www.fcc.gov.
Channel 1 through 7 on low power and channels 8 through 14 comprise the FRS 
(Family Radio Service). No license is required to operate on the FRS.

Safety Information for microTALK

®

 Radios

Your wireless handheld portable transceiver contains a low power transmitter. When 
the talk button is pushed, it sends out radio frequency (RF) signals. The device is 
authorized to operate at a duty factor not to exceed 50%. In August 1996, the Federal 
Communications Commission (FCC) adopted RF exposure guidelines with safety levels 
for handheld wireless devices. 

Important

FCC RF Exposure Requirements: For body-worn operation, this radio has been tested 
and meets the FCC RF exposure guidelines when used with Cobra accessories supplied 
or designated for this product. Use of other accessories may not ensure compliance  
with FCC RF exposure guidelines. Use only the supplied antenna. Unauthorized 
antennas, modifications or attachments could damage the transmitter and may violate 
FCC regulations. 

Normal Position

Hold the transmitter approximately two inches from your face and speak in a normal 
voice, with the antenna pointed up and away.

This device complies with part 15 of the FCC Rules. Operation is subject  
to the following two conditions: 1) This device may not cause harmful 
interference, and 2) this device must accept any interference received, 
including interference that may cause undesired operation.
FCC Warnings: Replacement or substitution of transistors, regular diodes or 
other parts of a unique nature, with parts other than those recommended by 
Cobra may cause a violation of the technical regulations of part 95 of the FCC 
rules, or violation of type acceptance requirements of part 2 of the rules.

Summary of Contents for microTALK CXR725


















Reviews: