Cobra microTALK CXR725 Owner'S Manual Download

Page: 8 / 17

Customer Assistance Warranty

Introduction

Operation

Mode Functions

Operation

Set DCS Privacy Codes

•

To select a DCS privacy code:
1.

After selecting a channel, press the

Mode

button until the DCS icon appears and the small

numbers flash on the display

(01 through 104).

NOTE

If CTCSS is turned

at the channel

selected, the display will flash the
DCS icon and “OFF.

”

To switch from

CTCSS to DCS, press the

Channel Up

Channel Down

button while the display

is flashing “OFF.

”

The display

will then show the small numbers flashing

and you will then be able

to proceed to step 2.

Press using the

Channel Up

Channel Down

button to select a DCS privacy code. You can
hold the

Down

button for fast advance.

When your desired DCS privacy code is

displayed, choose one of the following:

Press the

Mode

button to enter the new

setting and proceed to other functions.

Press the

Lock/Enter

button to enter the

new setting and return to

Standby mode.

Do not press any buttons for 15 seconds

to enter the new setting and return to

Standby mode.

Mode Button

Channel Buttons

DCS Privacy Code

Nothing

Comes Close to a Cobra

Set CTCSS Privacy Codes

•

To select a CTCSS privacy code:
1.

After selecting a channel, press the

Mode

button until the CTCSS icon appears and

the small numbers flash on the display (01

through 38).

NOTE

If DCS is turned

at the channel

selected, the display will flash the
CTCSS icon and “OFF.

”

To switch from

DCS to CTCSS, press the

Channel Up

Channel Down

button while the display

is flashing “OFF.

”

The display

will then show the small numbers

flashing and you will then be able

to proceed to step 2.

Press using the

Channel Up

Channel

Down

button to select a CTCSS privacy

code. You can hold the

Down

button for fast advance.

When your desired CTCSS privacy code is

displayed, choose one of the following:

Press the

Mode

button to enter the new

setting and proceed to other functions.

Press the

Lock/Enter

button to enter the

new setting and return to

Standby mode.

Do not press any buttons for 15 seconds

to enter the new setting and return to

Standby mode.

Mode Button

Channel Buttons

CTCSS Privacy Code

Summary of Contents for microTALK CXR725


















Search results

Summary of Contents for microTALK CXR725

Reviews:

Related manuals for microTALK CXR725

Brands by name

Popular brands

Cobra microTALK CXR725, Owner'S Manual

Search results

Summary of Contents for microTALK CXR725

Reviews:

Related manuals for microTALK CXR725

Brands by name

Popular brands