![background image](http://html.mh-extra.com/html/cobra/microtalk-cxr725/microtalk-cxr725_owners-manual_2631116010.webp)
Customer Assistance Warranty
Introduction
15
Operation
14
Mode Functions
Operation
To recall a stored memory channel location:
1.
Press the
Mode
button until the
Memory
icon
and the memory location number flash on
the display.
2.
Press the
Channel Up
or
Channel Down
button
to select a memory location (0 through 9).
If a location has been programmed before,
its associated channel/privacy code will be
shown on the display.
3.
Press the
Talk
button to return to
Standby mode
on the selected memory location.
A memory location can be reprogrammed at
any time it is displayed and flashing. Press
the
Lock/Enter
button to begin.
While recalling a stored memory location, if you do not press any
buttons for 15 seconds, your radio will automatically return to
Standby
mode on the channel/privacy code displayed before you
entered mode functions.
6.
Choose one of the following:
a.
Press the
Channel Up
or
Channel Down
button to select a
CTCSS privacy code (01 through 38) for the channel.
b.
Press the
Lock/Enter
button to switch from CTCSS to DCS.
The DCS icon and privacy code numbers will flash on
the display. The
Channel Up
or
Channel Down
button can
then be used to select a DCS privacy code (01 through 104)
for the channel.
If “OFF” flashes in place of the privacy code numbers,
a privacy code is already set in the opposite (CTCSS or DCS)
system. Press the
Channel Up
or
Channel Down
button to
cancel the opposite code and select a privacy code from the
active system for the selected channel.
7.
Choose one of the following:
a.
Press the
Lock/Enter
button to enter the channel/privacy
code in the selected memory location. Radio then proceeds
to next Memory location, which will blink.
b.
Press the
Mode
button to enter the channel/privacy
code in the selected memory location and proceed to other
functions on the channel/privacy code displayed before you
entered mode functions.
c.
Press the
Talk
button to enter the channel/privacy code in the
selected memory location and exit mode functions. Upon release
of the
Talk
button, the radio will enter
Standby
mode on the
channel/privacy code just entered.
Mode Button
Channel Buttons
Memory Icon
Nothing
Comes Close to a Cobra
®