![background image](http://html1.mh-extra.com/html/cobra/cx50fwe/cx50fwe_manual_2630604010.webp)
10
o
Check the CFD torque.
Every 10 hours of operation
o
Replace the fork oil.
o
Have the shock oil replaced by a Certified Cobra Mechanic.
Replacing Transmission / Clutch Lubricant
Tools needed:
5mm allen wrench
Minimum of 300 ml (10 oz)
Cobra Venom 3 Shoe Clutch Milk
(Part
#MCMUGF32).
Procedure:
1. Begin this procedure with a bike that has been ridden more than 5 minutes
but less than 10 minutes. It is desired to have the engine warm enough so
that the oil is ‘runny’ but not so hot that there is risk of being burned by the
engine or the oil.
Hot oil and hot components on the motorcycle may cause burns.
2. Remove the oil drain plug located on the right side of the engine, on the
clutch cover, near the brake lever (figure 1).
3. After it has drained, reinstall the plug, being sure that the gasket is in place.
4. Reapply oil from oil fill plug 300 cc (10 oz)
Cobra Venom 3 Shoe Clutch Milk
thru the oil fill plug.
NOTE:
Putting additional oil, up to 350 ml (12 oz), can help clutch life. More than
350 ml (12 oz) will degrade engine performance.
NOTE:
It can be helpful to lean the bike over on its left side to add oil to the bike.
Figure 1
Summary of Contents for CX50FWE
