![background image](http://html1.mh-extra.com/html/cobra/cx50fwe/cx50fwe_manual_2630604066.webp)
66
Brakes
Check before each ride:
Make sure the brake does not have any leaks by holding the lever in while
checking hose connections.
Make sure the brake lever pressure is OK by pulling in on the lever and
ensuring full braking performance is achieved before the lever touches the
handlebar. If this is not the case, pump the lever several times until the lever
feels firm.
Always make sure the rotor and brake pads are free from oil and grease.
Clean the rotor with mild dish soap or alcohol. Contaminated pads must be
replaced.
Ensure that the brake caliper is centered over the brake rotor. It a correction
is needed, Cobra has thin brake shims to help make minor adjustments in
alignment.
Always leave adequate free-play in the lever or pedal.
CAUTION:
This brake system uses only DOT 4 or 5.1 brake fluid!
Front Forks
The front forks are fully serviceable but it is recommended that only trained
professionals should service them. Contact Cobra for questions and service of
your forks.
Rear Shock
The rear shock is fully serviceable but it is recommended that only trained
professionals should service your shock. Contact Cobra for questions and
service of your CX50 SR shock.
Summary of Contents for CX50FWE
