Cobra 57648 Owner'S Manual & Safety Instructions Download

Page: 87 / 202

USER MANUAL

5.4.3.2 AD (Attribute Detection)

Attribute detection is a function to detect people’s facial features and send an alarm
according to the settings.

Alarm Type:

Select the alarm trigger condition. If the selection is “

No Mask

”, the NVR will

send an alarm if it detects a person doesn’t wear a face mask. If the selection is “

Wear

Mask

”, the NVR will send an alarm if it detects a person wears a face mask.

Buzzer

The NVR can use its internal buzzer to emit an alarm tone. You can set the buzzer

duration in seconds when an alarm is triggered.

Alarm Out

: Optional function. If your NVR support to connect to external alarm device, you

can set to emit an alarm tone.

Latch Time

: To configure the external alarm time when an alarm is triggered.

Record

: Click

icon and choose which channel(s) you want to record when the alarm is

triggered.

Post Recording

: You can set how long after an event occurs that the NVR will continue to

record. The recommended recording length is 30 seconds but it can be set higher up to 5
minutes.

Show Message

: Check the box to display “

” icon on the live view screen when the alarm is

triggered.

Send Email

: You can let the NVR to send you an auto-email when an alarm is triggered.

Full Screen

: If this function is enabled and an alarm is triggered in a channel, you will see its

full screen images in live view.

5.4.3.3 PD & VD (Human & Vehicle Detection)

To configure alarm actions for PD & VD alarms.

Buzzer

The NVR can use its internal buzzer to emit an alarm tone. You can set the buzzer

duration in seconds when an alarm is triggered.

Alarm Out

: Optional function. If your NVR support to connect to external alarm device, you

can set to emit an alarm tone.

Summary of Contents for 57648











































































































































































































Search results

Summary of Contents for 57648

Reviews:

Related manuals for 57648

Brands by name

Popular brands

Cobra 57648, Owner'S Manual & Safety Instructions

Search results

Summary of Contents for 57648

Reviews:

Related manuals for 57648

Brands by name

Popular brands