USER MANUAL
55
5.3.5 PTZ Linkage
If you had connected the PTZ cameras, you can set the linkage between PTZ cameras and
Motion Alarm and/or external I/O sensor alarm and/or PIR alarm. With the linkage function,
you can turn your PTZ cameras focus to the preset point when a motion, I/O alarm and or
PIR alarm happens.
Switch
: Enable or disable the PTZ linkage function.
Motion
:
Motion detection alarm will trigger the PTZ linkage function it is checked.
PIR
: PIR alarm will trigger the PTZ linkage function it is checked.
5.3.6 Exception
This menu allows you to set the type of events that you want the NVR to inform you.
Event Type
: Select the event type from below options:
-
No Space on Disk
: When an HDD is full.
-
Disk Error
: If the HDD is not detected properly.
-
Video Loss
: If a camera is not connected properly.
Switch
: Check the box to enable the monitoring of the event.
Buzzer
: Set the buzzer duration when the event occurs (Off/10s/20s/40s/60s). To disable
buzzer, select
OFF.
Show Message
: Check the box to display a message on the screen when No Space on
Disk, Disk Error, or Video Loss event happens.
Send Email
: Let the NVR to send you an auto-email when an event occurs.
