![background image](http://html1.mh-extra.com/html/cobra/2007-king-50/2007-king-50_service-manual_2630597066.webp)
Wheels & Tires
Rear wheel pullers
Disassembly:
Figure 45
1.
Remove axle, and
back wheel assembly.
2. Pull the rear wheel
pullers out of the back
of the swing arm.
Rear wheel alignment:
By eye, ensure that the rear sprocket is running true (in-line, planar) with the front
sprocket. When the sprockets are running true, the wheel is properly
straightened, and the chain will run straight.
Brakes
WARNING!
Your brakes need a break-in period to achieve maximum brake
power. 30-40 stops will bring the brake to peak performance.
Check before each ride:
•
Make sure the brake does not have any leaks by holding the lever in while
checking hose connections.
•
Make sure the brake lever pressure is OK by pulling in on the lever and
ensuring full braking performance is achieved before the lever touches the
handlebar. If this is not the case, pump the lever several times until the lever
feels firm.
•
Always make sure the rotor and brake pads are free from oil and grease.
Clean the rotor with mild dish soap or alcohol. Contaminated pads must be
replaced.
•
Always leave adequate free-play in the lever or pedal.
CAUTION:
This brake system uses only DOT 4 or 5.1 brake fluid
!
This portion will be updated shortly. Check our website
www.cobramotorcycle.com
for updates.
65