COBHAM Sea Tel 4010W-91, Installation Manual

Page: 99 / 141

4010W-91 Technical Specifications 4010W-91 Installation Manual
19-5
For Naval Engineering level information on this subject, please refer to Antenna Installation Guideline –
Site Arrangement, document number 130040 available on the Sea Tel Dealer Support Site.
19.10. Radome Assembly, 50”
Type/Material: Rigid fiberglass dome
Material: Composite foam/fiberglass
Size:
Diameter: 51.75 inches (131.3 cm)
Height: 59 inches (149.9 cm) MAX
Installed weight 250 pounds MAX including antenna
RF attenuation: 0.5 dB at 12 GHz, dry
0.5 dB @ 14 GHz, dry
Wind: Withstand relative average winds up to 125 MPH/201 Knmph from
any direction.
Ingress Protection Rating All Sea Tel radomes have an IP rating of 56
*NOTE: Radome panels can absorb up to 50% moisture by weight. Soaked panels will also have higher
attenuation.
19.11. Radome Assembly, 60”
Type/Material: Rigid fiberglass dome
Material: Composite foam/fiberglass
Size:
Diameter: 61 inch (155 cm)
Height: 66 inch (167.6 cm)
Installed weight (dry*) 300 pounds MAX including antenna
RF attenuation (dry*): 0.5 dB at 12 GHz, dry
0.5 dB @ 14 GHz, dry
Wind: Withstand relative average winds up to 201 Kmph (125 mph) from
any direction.
Ingress Protection Rating All Sea Tel radomes have an IP rating of 56
*NOTE: Radome panels can absorb up to 50% moisture by weight. Soaked panels will also have higher
attenuation.