COBHAM Sea Tel 4010W-91, Installation Manual

Page: 97 / 141

4010W-91 Technical Specifications 4010W-91 Installation Manual
19-3
19.6. MK 2 Pedestal Control Unit (PCU)
The PCU Assembly contains 3 Printed Circuit Boards (PCBs).
Connectors
AC Power 100-240 VAC, 2A-1A
USB Mini USB
GPS Input RJ-11 connector
Motor Control DA-15S connector
70/140 MHz SMA (on 4 ch Modem) 70/140 MHz input
Rotary Joint SMA
L-Band SMA L-Band input
RF M&C DE-9S connector
Feed DB-25S connector
Service DE-9S connector
Coax Switch
J2/NO/Co-Pol SMA
J3/COM/Common SMA
J1/NC/Cross-Pol SMA
Controls None
M&C Interface 9600 Baud 400MHz FSK
Status LEDs
PCU Status Diagnostic Status of the PCU
Modem Status Configuration & Diagnostic Status of the Modem
19.7. 400 MHz Base & Pedestal Unlimited Azimuth Modems (3 Channel)
Combined Signals (-1,-2)
Pass-Thru
950-3200 MHz RX IF,
Injected 22Khz Tone
DC LNB Voltage Select
400 MHz Pedestal M&C
Connectors:
RX IF L-Band SMA female
Rotary Joint SMA female
Radio / Ped M&C 9 pin D-Sub Connectors
RF Pedestal M&C Pedestal Control
Modulation FSK
Mode Full Duplex
Frequencies
BDE RF M&C TX = 447.5 Mhz +/-100 KHz
BDE Ped M&C TX = 452.5 Mhz +/-100 KHz
ADE RF M&C TX = 460.0 Mhz +/-100 KHz
ADE Ped M&C TX = 465.0 Mhz +/-100 KHz
Radio/Pedestal M&C Radio & Pedestal Control
Modulation FSK
Mode Full Duplex
Diagnostics LED Status Indicator for Power, Link communications and Self Test
Pedestal Interface RS-232/422
RF Interface (Jumper Selectable) RS-232, RS-422 (4 wire) or RS-485 (2 wire)