COBHAM Sea Tel 4010W-91, Installation Manual

Page: 26 / 141

4010W-91 Installation Manual Installation
3-6
HINT: It may be helpful to put the clamp bar and
rubber bar in place (held loosely by one screw) to
hold some of the Roxtec® Multidiameter blocks in
place while you complete the others.
22. Re-install the clamp bar using the hardware removed
in step 14 above.
3.4. Removing the Shipping/Stow Restraints PRIOR to Power-Up
The order in which the restraints are removed is not critical.
CAUTION: There are three shipping/Stow restraints on this antenna pedestal
that
MUST
be removed,
before energizing
the antenna, for normal operation.
3.4.1. Removing the AZ Shipping/Stow Restraint
1. The AZ Shipping/Stow restraint is formed by a
pin that is lowered into a channel in a stowage
block on the upper plate of the pedestal (as
shown).
Stow Plunger Handle
Stow pin
Stow Block