MBF-40 SMR900 PS REPEATER
PRODUCT DESCRIPTION AND USER’S MANUAL
Cobham Wireless
–
Coverage
Date: 31-May-18
www.cobham.com/wireless
Doc. No. 00141UM
Rev. 1.0
Page |
47
To activate the MBF-40 SNMP Agent
1. Click on the Config button (top right corner) and select SNMP Agent Config. The following pane appears:
Figure 4-9. SNMP Agent Configuration Display Area
2. Set the SNMP Agent toggle to ON.
3. Set the port and the Read-Only community.
4. Click Apply.
4.5 User Accounts
The MBF-40 comes pre-configured with default usernames and passwords in the various administration
levels.
At the moment, updating user accounts is available only via command line interface (CLI) or Axell Shell. See
the Common Commands and Attributes v2.4.0 document for detailed commands and syntax or click on the
Help button at the top right of the Web-GUI screen.
4.5.1 Default User Accounts
User Name Default Password
Details
Axell
AxellPasswd
Default user name.
omcuname iwnkhoob
Element Manager (AEM) user account. This account will not generate
VLI, LGO or CLR alarms.
sysadmin
AxellAdmin4050
This is the system administration password which is used for
firmware upgrades and user administration. Escalation to this level is
achieved by issuing command SYSADMIN from the user prompt.
useradmin
UseradminPwd23
This account contains user administration privileges. Escalation to
this level is achieved by issuing command USERADMIN from the user
prompt.
NOTE: It is strongly recommended to change the default user names and passwords immediately at commissioning. This
is done by using the command ACT PASSWORD. Please refer to the User Administration section in Common
Commands and Attributes document for detailed syntax.
Summary of Contents for MBF-40 Americas
Page 12: ......