0086
GTD Series
Installation, Operation,
Maintenance and Parts Manual
WARNING
!
CE Certified 230V-50Hz. Infrared Tube Heater.
The GTD Series Infrared Tube Heater is a positive pressure, dual-stage radiant heater system. All persons
involved with the installation, operation and maintenance of the heater system must read and understand the
information in this manual.
For Your Safety
If you smell gas:
• Do not try to light any appliance.
• Immediately call your gas supplier from a neighbor’s phone.
• Do not touch any electrical switch.
• Follow the gas supplier’s instructions.
• Do not use any phone in your building. • If you cannot reach your gas supplier, call the fire department.
Keep these instructions for future reference.
This heater
must be installed and serviced by a Gas Safe Registered Gas Engineer only!
Conversion of the heater for use with other gases must be carried out by a Gas Safe
Registered Gas Engineer. Read these instructions carefully before attempting to install,
operate or service the heater.
This heater is not approved for use in indoor residential applications
and must never
be installed indoor in the home. This heater may only be used in outdoor residential
applications or indoor/outdoor commercial (or industrial) applications. Installation in
residential indoor spaces may result in property damage, asphyxiation, serious injury or
death.
In locations used for the storage of combustible materials, signs must be posted to specify
the maximum permissible stacking height to maintain the required clearances from the
heater to the combustibles. Signs must either be posted adjacent to the heater thermostats
or in the absence of such thermostats, in a conspicuous location.
Failure to comply with these warnings and instructions, and those on the heater, could
result in personal injury or death.
LIOGTD-Rev. 4809
Print: 2/09-r4_11/7/12(DRP)
Replaces: LIOGTD-2/09(DRP)
