MBF-40 SMR900 PS REPEATER
PRODUCT DESCRIPTION AND USER’S MANUAL
Cobham Wireless
–
Coverage
Date: 31-May-18
www.cobham.com/wireless
Doc. No. 00141UM
Rev. 1.0
Page |
13
2.3.2 Rack Mount Installation
The supplied brackets are used to mount the repeater either on a wall or in a 19” rack. The same brackets
are used for both medium and high-power repeaters.
IMPORTANT!
•
The weight of the unit requires that two people mount the unit onto the rack.
•
The signal booster must always be installed vertically with the connectors on the
underside for protection. Horizontal installation on a bench for long time may cause
damage to the signal booster due to over-heating.
To mount the repeater in a rack
1. Use the x4 (provided) M8 fixing bolts and X4
spring washers to assemble the brackets as
illustrated below.
Figure 2-3. Rack-Mount Bracket Position
2. Mount the repeater vertically in the rack,
while adhering to standard rack mounting
procedures, and secure.
Figure 2-4. Rack-Mount Repeater Position
X4 M8 Bolts
x4 M8 Spring
Washers
Summary of Contents for MBF-40 Americas
Page 12: ......
