3
BBG-1002-2UDX Function Menu List and Descriptions
3-16
BBG-1002-2UDX PRODUCT MANUAL
BBG-1002-2UDX-OM (V1.3)
(continued)
• Standard Quick Set Aspect Ratio
Conversion Selectors
Selects between the standard preset Aspect Ratio Conversions (ARC)
shown below or scaler follow AFD.
Note: • The Scaler follow AFD control also appears on the AFD tab and
is mutually ganged with the selection performed on either tab.
Refer to AFDProcessor Controls (p. 3-47) for more information.
• This function is intended for aspect ratio adjustment of a
particular signal without AFD considerations.
- If ARC is being used on a case-by-case basis for a particular
signal, it is easier to use the Scaler ARC tools described here.
- If AFD is to be used to set and apply a standard AFD code label
for ARC, use Follow AFD Settings. Do not perform ARC here;
instead, perform ARC as described in the AFD function
description per AFDProcessor Controls (p. 3-47).
• User-defined Aspect Ratio Controls
Aspect Ratio Horizontal and Aspect Ratio Vertical controls adjust
horizontal and vertical zoom percentage. Settings less than (<) 100%
provide zoom-out; settings greater than (>) 100% provide zoom-in.
(50% to 150% range in 0.1% steps; null = 100.0)
Table 3-2
BBG-1002-2UDX Function Menu List — continued
Buttons allow standard ARC presets
to be applied to output video. For any
setting, using the Horizontal or
Vertical controls allow user custom
settings.
Pressing any of the preset buttons
restores the ARC to the selected
setting and overrides any previous
custom settings.
