3
BBG-1002-2UDX Function Menu List and Descriptions
3-38
BBG-1002-2UDX PRODUCT MANUAL
BBG-1002-2UDX-OM (V1.3)
Timecode
Provides timecode data extraction from various
sources, and provides formatting and re-insertion
controls for inserting the timecode into the output video.
Note: •
Timecode tab has identical independent controls for both Path 1 and Path 2 using the Path 1 / Path 2 sub-tabs.
Therefore, only the Path 1 controls are shown here. Set controls for other path using the respective sub-tab.
•
SMPTE embedded timecode controls and processing are correlated only to the path selected. Timecode data cannot
be transferred from one path stream to another.
Table 3-2
BBG-1002-2UDX Function Menu List — continued
SDI VITC
Detect/Extract
SDI ATC_LTC
Detect/Extract
SDI ATC_VITC
Detect/Extract
Priority/
Select
525i SDI
w/ VITC
Waveform
SDI VITC
Timecode
Proc/Embed
ATC_VITC
Timecode
Proc/Embed
ATC_LTC
Timecode
Proc/Embed
525i SDI
w/ATC_VITC
Insert
Control
Line
Number
Control
Buffer/
Format
ATC_VITC Insertion = Enabled
ATC_VITC = Line 13 (default SMPTE 12M-2)
BBG-1002-2UDX
525i 5994
w/ VITC
Waveform
525i 5994
w/ ATC_VITC
Noting that the incoming video contains VITC
waveform timecode data (as shown in the status
display), set the Source Priority drop-down lists to
include VITC Waveform timecode data (SDI VITC) as
a choice. This extracts VITC Waveform timecode
data from the incoming video.
In this example, it is desired to provide SDI ATC_VITC
timecode data in the processed output video. As such,
set SD ATC VITC Insertion to Enabled.
In the example here, the line numbers are set to the
default SMPTE 12M-2-2008 recommended values.
A
B
Shown below is an example in which received 525i 5994 SDI video with VITC waveform timecode is being processed to output
ATC_VITC timecode. To re-format and insert the timecode data, the following can be performed using the Timecode function.
Each Timecode control is fully described on the pages that follow.
A
A
B
Reference VITC
Detect/Extract
Free Run
(Internal Count)
Audio LTC
Detect/Extract