Cobalt Digital Inc 360, Owner'S Manual

Page: 52 / 120

3-16
Individual Drive Unit Trim Switches
Individual trim switches are provided to separately
operate the port and starboard drive unit trim.
Combination Port and Starboard Drive Unit
Trim Switch
This switch operates both the port and starboard
drive unit trim together.
Trim Tab Switches
The right switch activates the port trim tab. This
tab controls the starboard bow movement of the
boat. The left switch activates the starboard trim
tab. This tab controls the port bow movement of
the boat.
Remote Controls
NOTICE: Your Cobalt boat is equipped
with a safety switch for “start-in-
neutral-only” operation. Be sure the
shift levers are in neutral before
attempting to start the engines.
The following information relates to the general
description about your controls. Refer to the
propulsion unit operator’s manual or the control
operator’s manual for specific use.
Your controls have individual levers for drive unit
shift and engine throttle for each engine. The left
levers are for the port engine and the right levers
are for the starboard engine. The controls are
CAUTION
Do not shift too quickly from forward to
reverse. Damage to the engines may result.
When shifting from forward to reverse,
pause in neutral until the engines are at
idle speed and the boat has slowed.
!
WARNING
Improperly maintained controls are
hazardous and may cause sudden loss of
control. Make sure all shift/throttle
hardware and cables are regularly
inspected and maintained. Improper
maintenance may result in a loss of
control, resulting in serious injury or
death.
arranged with the shift levers (all one size and
color) grouped together and throttle levers (all the
same size and color, and larger than the shift
levers) grouped together.
Electronic Control
Your Cobalt 360 Performance Cruiser may be
equipped with an electronic shift/throttle control.
This control has an automatic synchronization
feature which increases fuel efficiency and
reduces vibration and noise.
Other features include warm-up and single lever
control.
For complete details on the electronic control and
to understand all procedures and functions, refer
to the manufacturer’s operation manual before
operating the vessel.
COB151
1. Station Transfer Button
2. Starboard Station-in-Command Indicator
Light
3. Port Station-in-Command Indicator Light
4. Synchronization Indicator Light
Equipment
The following information describes how standard
and optional equipment interfaces with your
Cobalt 360 Performance Cruiser.
Air Pump
The air compressor is located beneath the port
sun lounge cushion. It uses the 12 VDC system
and will operate when the AIR COMPRESSOR
switch at the cabin distribution panel is turned on.
For additional information, refer to the air compressor
operator’s manual in your owner’s packet.
3
1
2
4