5-6
Bilge
Keep the bilge area as clean as possible. Use a
vacuum cleaner to remove debris from the bilge
area. Oil and greasy dirt will accumulate over time
and can be normally removed using soap and
water. If necessary, consult your Cobalt dealer for
recommendations on special bilge cleaning and
absorption products.
Stainless Steel and Chrome
Stainless steel, though highly resistant, is still
capable of rusting, particularly in the marine
environment. Initial signs of rust and corrosion, left
untreated, may result in pitting and permanent
damage to components. The following steps will
help protect against such occurrences:
Preventive Steps
Clean and wax metal brightwork twice yearly and
prior to extended storage. In saltwater or other
harsh environments, more often as needed. Many
polish/cleaners are commercially available that
contain wax for one-step convenience.
Rinse with fresh water and wipe dry with towel or
chamois after each use.
Cleaning Stainless Steel
Remove rust or corrosion promptly using a good
metal cleaner/polish. Delay may contribute to
permanent finish damage. Do not use steel wool
or other coarse abrasives, or clean with acids or
bleach. Apply metal or automotive wax after
cleaning for additional protection.
Should you have reason to replace hardware or
fasteners, be certain that replacements are
correct materials. Consult your Cobalt dealer for
further information.
Use a Cobalt mooring cover to provide additional
protection.
CAUTION
These solvents are highly flammable.
Exercise proper care in cleaning and
notify personnel in dangerous area. Wear
rubber gloves during all cleaning activity.
Use caution in cleaning around stitching
and wooden or other decorative trim,
since these solvents could seriously
damage such areas.
Canvas
The boat top and other canvas items supplied on
your Cobalt boat are manufactured from top
quality materials to provide you with years of
trouble free service. The following information on
the care, cleaning and proper storage of the
fabrics and fasteners that make up your marine
canvas is provided to help you maintain the
appearance and ease of operation.
Cobalt uses Sunbrella
®
, a woven fabric made of
100% solution dyed acrylic fiber. It is very colorfast
and will withstand long-term exposure to the sun
(ultra-violet) without excessive fading or
deterioration.
Cleaning Canvas
Canvas should be cleaned regularly before
substances such as dirt, roof particles, etc., are
allowed to accumulate on and become embedded
in the fabric. The fabric can be cleaned without
being removed from the installation. Simply brush
off any debris, hose down and clean with a mild
solution of natural soap in lukewarm water (no
more than 100°F). Rinse thoroughly to remove
soap. DO NOT USE DETERGENTS. Allow to air
dry.
Special Cleaning Problems
For heavily soiled fabric, remove the top from
frame. Soak the fabric in a solution that has been
mixed to the following proportions:
●
1/2 cup of Clorox
●
1/4 cup of Ivory Snow, Dreft™ or Woolite™
●
Per each gallon of lukewarm water (water
should be no more than 100°F)
CAUTION
Under no circumstance are these fabrics
to be put in hot water. Under no
circumstances are these fabrics to be run
through the hot drying cycle of an
automatic dryer. Fabric should be line
dried. Under no circumstances are these
fabrics to be steam pressed at a dry
cleaner.
Summary of Contents for 360
