Cobalt Digital Inc 360, Owner'S Manual

Page: 72 / 120

3-36
To remove the forward arms, release tension and
press slide button on quick release receptacle aft.
Reverse procedure to stow canvas.
COB138
To use the aft bimini:
1. Unzip boot from the arch.
2. Unroll canvas and zip back to the arch zipper.
3. Rotate bow aft and attach straps to eyelets on
arch. Tighten straps as necessary.
COB139
To install the enclosure:
1. Set up forward and aft bimini tops.
2. Zip canvas to the biminis and snap to
windshield and deck. Start at the center and
continue aft along each side.
When stowing, roll enclosure canvas – do not fold
the clear vinyl.
Cockpit Tonneau Cover – Optional
COB140
The cockpit tonneau cover protects the helm and
cockpit from damage due to birds, UV light and
weather, and is highly recommended to protect
your investment. Do not use the tonneau cover for
storage any longer than a few days, use the
optional mooring cover. To install the tonneau
cover:
1. Unroll cover and snap to the deck by starting at
the center of the windshield.
2. Install the tonneau support poles to the
underside of cover with snap and adjust poles
to approximate height of windshield. Poles are
stored under the starboard cockpit bench seat.
3. Snap the aft end of the cover to back deck
starting in center and working outboard.
NOTICE: You may have to readjust the
support poles for proper fit.
4. Continue snapping up sides.