Cobalt Digital Inc 296 BOWRIDER, Owner'S Manual

Page: 81 / 132

Cobalt_OM_preprint_shell.fm Page 1 Wednesday, March 1, 2006 5:39 AM
296 Owner’s Manual 3
-
27
O
PERATING
I
NFORMATION
Dual Lever Style - These controls have individual
levers for each drive unit’s shift and each engine’s
throttle. The left levers are for the port engine and
the right levers are for the starboard engine. The
controls are arranged with the shift levers (all one
size) grouped together and throttle levers (all one
size, and larger than the shift levers) grouped
together. The left levers (smaller) are the shift
levers and right levers (larger) are the throttle
levers. The shift levers have three positions:
FORWARD (forward), NEUTRAL (center) and
REVERSE (back). A detent will hold them in the
selected position. The throttle increases when
pushed forward and decreases when pulled back.
9. DRIVE UNIT TRIM SWITCH - This switch
controls the trim angle of the drive unit and will
maximize the performance and ride of the boat. If
combined with the optional trim tabs, enhancement
to your performance and ride can be achieved.
10. TRIM TAB SWITCHES - These switches
control the trim tab angle of the port and starboard
trim tabs. The trim tabs can be used with the drive
unit trim system to enhance ride performance.
CIRCUIT BREAKERS - These are the breakers for
the helm labeled protected device. These breakers
will activate if overloaded, and cut power to the
switch. To restore power, turn off the device, push
the breaker button in and release. If the button
continues to pop out when the device is used, see
your authorized Cobalt dealer. Your boat may not
be equipped with all of these features or options.
12-VOLT ACCESSORY POWER RECEPTACLE -
Your Cobalt boat is equipped with a 12-volt
accessory power receptacle. The receptacle
provides electricity to operate 12V DC accessory
items. Limit the accessory to 10 amps.