Cobalt_OM_preprint_shell.fm Page 1 Wednesday, March 1, 2006 5:39 AM
296 Owner’s Manual
5
-
3
I
NTERIOR
/E
XTERIOR
C
ARE
SISAL SEAGRASS CARPET
ALTERNATIVE CLEANING
INSTRUCTIONS
Use the following instructions from Syntec
Industries to clean your Sisal Seagrass mats.
Both Textilene and Earthtex yarns are used in the
production of these Interior and Exterior Designs
Collection. Textilene is a new low-VOC emitting
vinyl, which can easily be cleaned by vacuuming or
damp mopping. A mild detergent is best to clean
even the toughest stains. Textilene fabric is also
U.V. Stable and Anti-microbial.
Earthtex yarns (chenille and textured polypropylene
yarns) are used in conjunction with the Textilene
yarn and may be cleaned in the same manner. Both
Textilene and Earthtex yarns and fabric are
recyclable. Earthtex is also U.V. Stable and
Anti-microbial.
Outdoor rugs and mats may be hosed off and then
left to dry. Hanging the mat or rug accelerates
drying time. It is best to always hang or roll these
products with the face out.
The urethane backing does absorb water, but dries
in a relatively quick time.
The backing is recyclable, as is the face fabric.
Care instructions:
• For storage, always roll with the face of product
out WITH THE BACKING FACING IN, do not
fold or crease, backing may split.
• Split or cracked backing due to folding or rolled
carpet standing on end will void any existing
warranties.
• Vacuum or hose off for regular cleaning. Dry
face up or hanging.
CABINETRY AND WOOD
Cabinetry
Clean with any water-rinseable non-abrasive
cleaner.
Ebony Woodgrain Dash
Your Cobalt boat may be equipped with a
woodgrain dash, which will maintain its natural
beauty and high-gloss sheen when properly
maintained.
• For routine cleaning wipe the surface with a
damp, soft cotton cloth. For thorough cleaning,
wash surface with a mild solution of soap and
water, and dry with a soft cotton cloth.
• Do not use cleaners or polishes containing
alcohol, ammonia, abrasives, oily emollients or
petroleum-based materials.
• Avoid saturating the surface with polish or wax.
In some instances, foam-backed tape used in
manufacturing will absorb and retain these
substances and result in premature fading
and/or discoloration of your woodgrain dash. If
cleaners or waxes come in contact with edges,
clean the surface immediately with a mild
solution of soap and water.
Teak Swim Platform
Your Cobalt boat may be equipped with a teak swim
platform. To keep teak in top condition, clean it
occasionally with a teak cleaner and re-oil it at least
once a season. Follow the manufacturer’s
instructions and warnings carefully. Some cleaners
and oils may damage gelcoat, vinyl, stainless or
aluminum. Avoid using rust-producing steel wool
pads when cleaning. Materials can be purchased
from your authorized Cobalt dealer.
NOTICE: Teak sealers and
cleaners can be harmful to other
materials. Make sure you
thoroughly remove any spills or
excess. Teak should not be
varnished. The natural oils in
teak will cause poor adhesion.
Summary of Contents for 296 BOWRIDER
