11
Step Five
: Place the front panel against both side walls making sure the front panel pegs are inserted in the
slots of the of the side panels and pull wall down. The front panel has pegs on each side, so you will lift it up
and down to secure as explained on page 6.
TIP
:
The bottom of the front panel will fit snug between the floor trim. In the event of the wood expanding in a
humid environment, it may be helpful to step with force on the bottom of the door frame to push the wall
down. For a single person install, it may be easier to remove the glass door for easier handling. This is done by
removing the inside hinge plate/inside of glass door.
Summary of Contents for Delmar Series
Page 20: ...20 Control Panel Instructions ...
Page 22: ...22 Step Fourteen SWEAT ...
