16
Next locate all of the plugs and wires on top of the sauna. Sometimes during shipping, they can shift
underneath other wires. Move them so they are easily accessable Place the top panel on top of the sauna
(lights in front/vent in back), and feed the wires from the top of the walls through the corresponding holes of
the top panel, and confirm the following:
•
TIP: Leave the door open during the next steps for easy access while installing the door handle
•
The top panel’s air vent corresponds to the back of the unit with the outside lights in front.
•
The wires coming up into the top are led through each hole smoothly and not pinched.
•
The trim of the top panel fits snug around all four side walls (Note: you may need to pull down on the
top as you push/move the walls to secure as it is a snug fit, as the wood may have expanded during
transport).
Summary of Contents for Delmar Series
Page 20: ...20 Control Panel Instructions ...
Page 22: ...22 Step Fourteen SWEAT ...
