Operating instruction
High-Z T-Series
Siemensstrasse 13-15
D-47608 Geldern Tel. +49 (0)2831/91021-20
Page 61
15.02.2014
Oil linear guides
Personnel:
Qualified personnel
Safety equipment:
protective clothing
Safety shoes
Chemical-resistant gloves
Figure 28: linear guides of the X-and
Z-axis
1
2
Switch off the machine and secure against re-start.
Grease the linear guides of the X-axis (Fig. 28/1), the
Z-axis (Fig. 28/2) well using a low-friction grease
wetted cloth DIN 61650 or alternatively apply the fat
with a suitable brush.
Figure 29: Cover Y-axis
2 Loosen and remove the four screws (Fig. 29/2).
3 Remove the cover (Fig. 29/1) on the Y-axis.
Figure 30: Linear guide the Y-axis
4 Grease the linear guides of the X-axis (Fig. 30/1)
well using low-friction grease soaked cloth DIN
61650 or alternatively apply the grease with a
suitable brush.
1
2
2
2
1
1
2