Operating instruction
High-Z T-Series
Siemensstrasse 13-15
D-47608 Geldern Tel. +49 (0)2831/91021-20
Page 59
15.02.2014
8.4
Maintenance
8.4.1
Cleansing of the machine
Regular maintenance of the machine prevents sticking of moving parts.
Property damage caused by compressed air!
Pressurized air can damage the ball screws of the T series machine.
• Never use compressed air to clean the T series machine!
Personnel:
Operator
Safety equipment:
protective clothing
Safety shoes
protective gloves
1 Turn power switch on the stepper motor control to "0" or
"Off"; see separate operating instructions for the step
motor control.
2 Free machine from chips.
ATTENTION:
Risk of injury by chips!
Chips can be sharp and cause deep lacerations.
Always wear protective gloves when removing chips.
3 Free ball screws, Trapezoidal Thread Spindle and linear guides from
chips
4 Clean the entire machine with a slightly oily cloth DIN 61650
8.4.2
Lubricate machine
The lubricants reduce wear, protect against pollution, reduce corrosion and prolong the
service life by their properties.
For supplies, see chapter 3.4 "supplies" on page 27.
