Operating instruction
High-Z T-Series
Siemensstrasse 13-15
D-47608 Geldern Tel. +49 (0)2831/91021-20
Page 34
15.02.2014
Abb. 10c: X-Carriage
1 stop (M8 screw)
2 magnet holder of the X axis
3 mounting screw magnet holder (M6 screw)
The M8 screw (Fig. 10c / 1) serves as a stop for the
magnet holder (Fig. 10c / 2). This stop is required to
locate the factory setting, if for reasons of user-defined
settings the magnet holder was transferred.
To move the magnet holder (Fig. 10c / 2) loosen the
fixing screw (Fig. 10c / 3), move the magnet holder
along the groove to the desired position and secure with
the fixing screw to prevent loosening
HINT:
If the position of the magnet holder of the X-axis is changed, settings must
be taken into account in the control software under the topic “working
space”.
4.3.4
Tool holder
Abb. 11: Tool holder 43H7
On the tool holder of the Z-axis (Fig. 11/1) are some of
the most important additional available tools attached
(see Appendix "Accessories").
4.4
Controls
The machine does not have its own controls for moving the axes. This is possible with
separate interfaces (e.g. stepper motor control Zero3)
1
1
2
3
