Operating instruction
High-Z T-Series
Siemensstrasse 13-15
D-47608 Geldern Tel. +49 (0)2831/91021-20
Page 55
15.02.2014
7.6
Activities after use
Personnel:
Operator
Safety equipment:
protective clothing
Safety shoes
protective gloves
1. Turning off the machine.
ATTENTION:
Risk of injury by chips!
Chips can be sharp and cause deep lacerations.
Always wear protective gloves when removing chips.
2. Clean the machine (see page 58 / 8.4).
7.7
Emergency Shutdown
In hazardous situations, movements of components must be stopped as soon as possible
and the power supply must be switched off.
Stopping in an emergency
1 Immediately activate emergency stop by emergency stop
device.
2 If there is no danger for your health, remove persons
from the danger zone.
3 If necessary, initiate first aid measures.
4 Call Fire department and / or ambulance service.
5 Inform the responsible person on site.
6 Turn the machine off and secure it against being
switched on again.
7 Keep access routes for emergency vehicles free.
8 Instruct rescue vehicles.
