※
You can discharge the beans anytime during the roasting by touching the <EjECT> button, or pulling the <manual discharge valve> at the
back if the bean is not discharged with the <EjECT> button.
※
You can discharge the beans anytime during the roasting by touching the <EjECT> button, or pulling the <manual discharge valve> at the
back if the bean is not discharged with the <EjECT> button.
EnTER
uP or DOwn
EnTER
EnTER
uP or DOwn
Text window
Temperature
display
Functional
display
Button
Operation status
Remarks
selecting program
PRgM Fs
uP/DOwn
-
selecting program
start
CLEAn /
Fs-PRHT
sTART
Heater and fan operation
At the first operation after the power connection
or every third operation, the device will sound
chaff tray cleaning alarm (CLEAn). Then clean the
tray and reinstall to release the alarm and switch
to the PREHEAT (preheating)
Preheating
Fs-PRHT
-
The drum rotates for 10
seconds per minute.
The drum repeats 50s stop and 10s rotation.
Coffee green
bean input
AD BEAn
165
℃
-
Drum rotation
Put 300~800cc of Raw coffee bean using the
hopper, and release alarm when the temperature
reaches to 120
℃
1st heating
Fs-RP01
150
℃
-
〃
1st holding
Fs-HD01
150
℃
-
〃
not displayed for 0-second
2nd heating
Fs-RP02
183
℃
-
〃
2nd holding
Fs-HD02
183
℃
-
〃
Maintain for 60 seconds
3rd heating
Fs-RP03
192
℃
-
〃
3rd holding
Fs-HD03
192
℃
-
〃
Maintain for 60 seconds
Add time
AD TiME
EnTER
〃
Adding time can be determined 40 seconds
before the 3rd holding / Touching the EnTER
button adds 30 seconds / total 6 times (3
minutes) of adding are allowed
Discharging
EjECT
EjECT
Heater off / outlet open
Touch the EjECT button
when the roasting status you want
Cooling
COOLing
-
Outlet close / Drum rotation
off
Open the outlet, and close the
outlet after 30 seconds
Finish
Fs-EnD
-
Fan off
Finish after 5 minutes cooling
Determine
save or not
PRgEM Fs
sAvE
EnTER / CLEAR
To save, touch the EnTER button if not,
touch the CLEAR button
Roasting strength
change
PRgEM Fs
Lighter /
Darker
uP/DOwn and
then EnTER
Adjust roasting strength with the uP/DOwn
button, and then touch the EnTER button
Program no.
selection
PRgM 02~20
uP/DOwn and
then EnTER
select the program to be saved
with the uP/DOwn button and then touch the
EnTER button
※
when the roasting reaches the status you want, you can touch the <EjECT> button anytime during the roasting to discharge and for your own programming.
※
if no ADD TiME is required, touch the <EjECT> button at the roasting status you want instead of touching the <EnTER> button.
※
if you don’t want to save the program, you can touch the <CLEAR> button anytime to return to the initial screen.
PrGM-fS is not a roasting program but a program for user programming, therefore keep monitoring while it is being used.
Neglecting may lead to burn off the bean or cause a fire.
※
when the roasting reaches the status you want, you can touch the <EjECT> button anytime during the roasting to discharge and for your own programming.
※
You always need to touch the <EnTER> button for the 1st crack during RP02 and for 2nd crack during RP03. Otherwise, it is progressed according to the built-in conditions.
※
if you don’t want to save the program, you can touch the <CLEAR> button anytime to return to the initial screen.
Text window
Temperature
display
Functional display
Button
Operation status
Remarks
selecting program
PRgM Cs
uP/DOwn
-
selecting program
start
CLEAn /
Cs-PRHT
sTART
Heater and fan
operation
At the first operation after the power connection or every
third operation, the device will sound chaff tray cleaning
alarm (CLEAn). Then clean the tray and reinstall to release
the alarm and switch to the PREHEAT (preheating)
Preheating
Cs-PRHT
-
The drum rotates
for 10 seconds
per minute.
The drum repeats 50s stop and 10s rotation.
Coffee green
bean input
AD BEAn
165
℃
-
Drum rotation
Put 300~800cc of Coffee green bean using the hopper,
and release alarm when the temperature reaches to
120
℃
1st heating
Cs-RP01
150
℃
-
〃
1st holding
Cs-HD01
150
℃
-
〃
not displayed for 0-second
select 1st crack
temperature
After lighting the
1st CRACK, HD02
150~190
℃
EnTER
〃
when you can hear the 1st crack sound between
150~190
℃
, Touch the EnTER button
for automatic maintenance.
2nd holding
Cs-HD02
150~190
℃
-
〃
Maintain for 60 seconds
select 2nd crack
temperature
After lighting the
2nd CRACK, HD03
191~200
℃
EnTER
〃
when you can hear the 2nd crack sound between
191~200
℃
, Touch the EnTER button
for automatic maintenance.
Discharging
EjECT
EjECT
Heater off / outlet
open
Touch the EjECT button
when the roasting status you want
Cooling
COOLing
-
Outlet close /
Drum rotation off
Open the outlet, and close the
outlet after 30 seconds
Finish
Cs-EnD
-
Fan off
Finish after 5 minutes cooling
Determine
save or not
PRgEM Cs
sAvE
EnTER / CLEAR
To save, touch the EnTER button if not,
touch the CLEAR button
Roasting strength
change
PRgEM Cs
Lighter /
Darker
uP/DOwn and
then EnTER
Adjust roasting strength with the uP/DOwn button,
and then touch the EnTER button
Program no.
selection
PRgM 02~20
uP/DOwn and
then EnTER
select the program to be saved with the uP/DOwn
button and then touch the EnTER button
CRF-800
smart Ceramic Coffee Roaster user Manual
CRF-800
smart Ceramic Coffee Roaster user Manual
Programming using PrGM-fS
Programming using PrGM-CS
PRgM-Fs
sTART
CLEAn : chaff tray cleaning
Coffee green bean input
EjECT (Discharging)
PRgM-Cs
EnTER (1 CRACK)
EjECT (Discharging)
EnTER
uP or DOwn
EnTER
EnTER
uP or DOwn
sTART
(CLEAn : chaff tray cleaning)
Coffee green bean input
EnTER (2 CRACK)
10
11
PrGM-CS is not a roasting program but a program for user programming, therefore keep monitoring while it is being used.
Neglecting may lead to burn off the bean or cause a fire.
