ASSEMBLY
1. Unfold the folding arms (3) and rotate the mounting knobs (4) so that they are squared up with the
ends of the arms.
2. Feed them into the first set of mounting holes in the side of the
Portable Work Station and push them in until the stops (5) locate
against the Portable Work Station body.
The Extension Tray can be fitted to the left or right hand
side of the Portable Work Station.
3. Rotate the mounting knobs 45° to lock them in position.
4. Locate the tool tray (2) between the folding arms.
If fitting a second Extension Tray to your Portable Work Station, fit it the next series of
mounting holes on the opposite side to the first tray.
If using the Portable Work Station with the jaw reversed
(wide clamping position) the Support arm (1) can be
positioned higher so that it is level with the base of the
moving jaw. Loosen the Pivot knobs (6) until the spacers
(7) can be separated and the top spacer rotated 90°.
Re-tighten the knobs.
WARRANTY
Model:
CMT200-04
Serial Number: _________________________
Retain your receipt as proof of purchase.
(Located on motor label)
CMT warrants to the purchaser of this product
that if any part proves to be defective due to
faulty materials or workmanship within 1 YEAR
from the date of original purchase, CMT will
repair, or at its discretion replace, the faulty part
free of charge.
This warranty does not apply to commercial
use nor does it extend to normal wear and tear
or damage as a result of accident, abuse or
misuse.
If the productis faulty or requires service please
refer to your nearest authorised CMT Repair
Centre. Warranty does not include any freight to
and from the user.
Assembly - Warranty
3
