CMF Power Select, Installation And Operation Instructions Manual, Page: 9 / 40

Installation / Operation Instructions
CMF Power Select Ver. 3.0
REV 6.3
8
3 Operation
3.1 Operator Panel
3.1.1 The operator panel consists of an electrical enclosure and the HMI
(Human Machine Interface). The HMI is a touch screen interface that allows the
operator to interact with the machine.
3.1.2 To navigate the HMI, there are buttons displayed on the screen. To activate a
button, simply touch it lightly. Some buttons have a built in delay. Delay-type
buttons must be touched and held for 1 second before the action will execute.
There are also textboxes to display and input data. Just like a button, touch the
textbox to edit the value. The “CMF” logo at the bottom of the screen with either
take you to the “MENU” screen, or back to the “HOME” screen depending on what
screen is currently displayed. Touch the banner at the top of the screen at any
time to view messages.
3.2 Power Up
3.2.1 After the unit is installed, and power is turned on to the main panel and the
operator panel, the HMI will boot to the “Welcome” screen.
3.2.2 Once the operator closes the welcome screen, the HMI will display the “Home”
screen (Fig 4). From the “Home” screen, the operator can see the current position
of the inner spout(s) and access other screens by interacting with the buttons.
Fig. 4: Home screen