CMF Power Select, Installation And Operation Instructions Manual, Page: 18 / 40

Installation / Operation Instructions
CMF Power Select Ver. 3.0
REV 6.3
17
5.6 Ethernet
5.6.1 The default network parameters for the Ethernet connection are shown below.
These parameters can be changed by connecting the PLC to a switch/hub and
entering the IP address in a standard web browser such as Google Chrome or
Mozilla Firefox. If a switch is not available, a 1:1 connection can be established
with a computer provided the computers IP address is set to static and configured
to use the same subnet mask as the PLC.
5.6.2 Default network parameters
PLC IP address: 192.168.1.51
HMI IP address: 192.168.1.50
Subnet mask: 255.255.255.0
5.6.3 Changing the PLC network parameters
Enter the current IP address of the PLC in the web browser address bar. Enter
the username and password. Username: USER Password: USER. Once
logged in, browse to the “Maintenance” tab and click “Post Conf” on the left side of
the page. You can now edit the network parameters. Be very careful when editing
the post file and double check your entry before clicking on the “Save” button.
For
the new settings to take effect, a power cycle of the PLC is required.
Fig. 9: PLC login