CM Three-Phase Perfection Premium Series User Manual Download Page 2

Page: 2 / 38

Microprocessed Voltage Regulator

Three-Phase Perfection Premium Series

User´s Manual

CM COMANDOS LINEARES

- 2/38 -

Table of Contents

Security Regulations ________________________________________________________ 3

Receipt __________________________________________________________________ 4

Receipt Inspection by the Client _______________________________________________ 4

Refusal of the Material _______________________________________________________ 5

Receipt with Reservations ____________________________________________________ 5

Handling _________________________________________________________________ 6

Storage __________________________________________________________________ 7

Installation ________________________________________________________________ 8

Preparation

– Choice of local and environment setting ______________________________ 8

Positioning ________________________________________________________________ 9

Composition ______________________________________________________________ 10

Electrical Connections

– typical installation sketches ______________________________ 10

* For other voltages, please, consult

CM Comandos Lineares

´ Applications Engineering

Department. Placement of Internal Components __________________________________ 11

Cable Terminal Block _______________________________________________________ 13

IT Model Connection Label __________________________________________________ 14

Terminal Label ____________________________________________________________ 14

OUTPUT NEUTRAL _______________________________________________________ 14

GROUND ________________________________________________________________ 14

Cable Connections ________________________________________________________ 15

Initial activation ___________________________________________________________ 16

Functional Check __________________________________________________________ 18

Failure Reset or Alarm, with Connected Load. ___________________________________ 18

Voltage regulator Operation Recommendation ___________________________________ 18

Functioning Theory ________________________________________________________ 19

System Description ________________________________________________________ 19

Purpose: ________________________________________________________________ 19

Applications ______________________________________________________________ 19

Performance _____________________________________________________________ 19

Stabilization Principle _______________________________________________________ 20

Panel Messages and Measurements ___________________________________________ 21

Normal Operation _________________________________________________________ 21

Baud Rate Serial __________________________________________________________ 21

Serial Number ____________________________________________________________ 22

Sound Alarm _____________________________________________________________ 22

Date & Time ______________________________________________________________ 22

Output Power KVA _________________________________________________________ 22

Output Power KW _________________________________________________________ 22

Network Frequency ________________________________________________________ 22

RST Output Voltage ________________________________________________________ 22

RST Input Voltage _________________________________________________________ 22

Alarm Description _________________________________________________________ 23

Under and Over Voltage Protection ____________________________________________ 25

System with Automatic Reset ________________________________________________ 26

Main Characteristics _______________________________________________________ 26

Technical Specifications ____________________________________________________ 27

Physical Dimension Table ___________________________________________________ 29

IT Models

– Isolated Three-Phase _____________________________________________ 29

TA Models

– Three-phase with input auto transformer _____________________________ 29

T Models

– Three-phase without input transformer ________________________________ 30

Internal Circuit Breaker Table ________________________________________________ 30

Preventive Maintenance ____________________________________________________ 31

First Aid _________________________________________________________________ 32

Corrective Maintenance _____________________________________________________ 34

Procedures to open a technical call ____________________________________________ 34

Accredited Network ________________________________________________________ 34

Summary of Contents for Three-Phase Perfection Premium Series







































Search results

Summary of Contents for Three-Phase Perfection Premium Series

Reviews:

Related manuals for Three-Phase Perfection Premium Series

Brands by name

Popular brands

CM Three-Phase Perfection Premium Series, User Manual

Search results

Summary of Contents for Three-Phase Perfection Premium Series

Reviews:

Related manuals for Three-Phase Perfection Premium Series

Brands by name

Popular brands