Microprocessed Voltage Regulator
Three-Phase Perfection Premium Series
User´s Manual
CM COMANDOS LINEARES
- 21/38 -
Panel Messages and Measurements
The
Perfection Premium Series Voltage regulator
has a liquid crystal display which,
through messages and measurements, informs the voltage regulator´s operational
condition, enabling commands which the operator may need to run by simply
pressing the button on the panel according to the needs, or simply by verifying the
measurements and status, such as voltage, frequency, consumed power, etc.
Below is the sequence presented on the screen. To select them in the following
order, simply press the Up or Down arrow.
Press Enter
To Start
Initial screen after energizing the voltage regulator
– to turn it on, press the Enter
button.
Normal Operation
CM COMANDOS LINEARES
Indication that the voltage regulator is ON and running normally.
Baud Rate Serial
Configuration
Shows the data transmission speed
– to visualize and/or alter, press the Enter
button and select the value through the up and down buttons.
Date & Time
Configuration
Allows for Date and Time adjustment
– to alter, press the Enter button and select
the value through the Up and Down buttons.
Turn
Voltage regulator OFF?
Command to turn the voltage regulator off - to turn off, press the Enter button.
Transfer Bypass?
Press Enter
Command to transfer the voltage regulator to bypass
– to run the Bypass
command press the Enter button.
Bypass Command
Triggered
Indication that the command to transfer to bypass has been effected.
