REAR SUSPENSION
Leaf Springs (Two-Passenger Vehicles)
9
1
2
3
4
682
Figure 9-1
Support Vehicle on Jack Stands
651
Figure 9-2
Disconnect Brake Cable
LEAF SPRING INSTALLATION (TWO-PASSENGER VEHICLES)
1.
To install the springs, reverse the removal procedure.
See following CAUTION.
CAUTION
•
When positioning the spring on the transaxle, be sure to insert the locating bolt on the spring in the
locating hole in the transaxle saddle.
2.
Tighten the nuts on the U-bolts to 25 ft-lb (34 N·m) and tighten nuts (2) on spring mounting bolts (17) to 15 ft-lb
(20.3 N·m)
(Figure 9-3, Page 9-4)
.
3.
Install tire and wheel assembly.
See Wheel Installation, Section 8, Page 8-1.
2009 Electric Precedent Maintenance and Service Manual
Page 9-3