IQ DISPLAY MODULE (IQDM) AND IQDM-P
DIAGNOSTICS: EXCEL SYSTEM
Functions Menu
14
7.
Select
write settings to controller
.
8.
Press + on the change value button to confirm the operation.
9.
The handset will display an “executing...” message for the next few seconds while the controller settings are being
stored in the handset’s memory
(Figure 14-4, Page 14-14)
.
10. When the handset is finished transferring the speed controller settings, a confirmation message is displayed
(Figure 14-6, Page 14-15)
.
11. Repeat this procedure for additional vehicles that need to be programmed with the same handset settings.
2
1
3
2
1
3
698
Figure 14-6
Confirmation Message
699
Figure 14-7
Confirmation Message
RESET ALL SETTINGS
In the event that a mistake was made and one or more changes should not have been made with the handset, the
speed controller settings can be reverted to the original settings from the beginning of the session (when the handset
was plugged into the vehicle). This function is similar to the “undo” command on a PC and will work correctly only
when the handset has
not
been unplugged and power to the speed controller has
not
been interrupted.
Resetting All Settings
1.
During an active session when the settings need to be returned to the original values (the values that were active
at the beginning of the session), scroll to the
functions
menu and select.
2.
Select
settings
.
3.
Select
reset all settings
.
4.
Press + on the change value button to confirm the operation.
2009 Electric Precedent Maintenance and Service Manual
Page 14-15
