BODY AND TRIM
Rear Body – Two-Passenger Vehicles
4
REAR BODY – TWO-PASSENGER VEHICLES
See General Warnings on page 1-1.
UNIVERSAL ACCESSORY MOUNTING
The Structural Accessory Module (SAM) includes two threaded inserts on both the driver side and the passenger side
(Figure 4-6, Page 4-9)
. These inserts serve as common attachment points (1) for various accessories. Accessories
that can be mounted to the SAM include single or dual sand bottles, sand bucket, and the club cleaner.
1
621
Figure 4-6
Universal Accessory Mounting
BACKREST AND STRUCTURAL ACCESSORY MODULE (SAM)
SAM Removal
1.
If the vehicle has a canopy, the rear upright supports must be removed from the SAM.
2.
Remove four bolts (4) to release the SAM (3) from the vehicle
(Figure 4-7, Page 4-10)
.
SAM Installation
Position the SAM (3) over its mounting holes and secure with four screws (4). Tighten screws to 53 in-lb (6 N·m).
Backrest
The backrest (1) is secured to the SAM (3) with two screws (2)
(Figure 4-7, Page 4-10)
. When replacing the backrest,
tighten screws (2) to 5.9 ft-lb (8 N·m).
Bag Rack Removal
1.
Remove two screws (10) to release the bag hoop (6) and related components from the SAM (3)
(Figure 4-7,
Page 4-10)
.
2.
Bag strap (8) may be released by removing two plastic barrel connectors (9) and one screw (12).
3.
Bag strap buckles (7) may be snapped out of bag hoop (6).
Bag Rack Installation
Installation is the reverse of removal. Tighten screw (12) to 4.8 ft-lb (6.5 N·m) and screws (10) to 11.8 ft-lb (16 N·m).
Sweater Basket
The sweater basket (11) is secured to the bag hoop assembly by three screws (12). Tabs on the upper edge of the
basket align with holes in the bag hoop (6) for installation purposes. Tighten screws (12) to 4.8 ft-lb (6.5 N·m) to
secure the sweater basket
(Figure 4-7, Page 4-10)
.
2009 Electric Precedent Maintenance and Service Manual
Page 4-9
