18
Motor
MOTOR (MODEL EJ4-4001 AND EJ8-4001A)
731
Figure 18-3
Lower Axle
9.
Remove the bolts and lock washers that secure the motor to the transaxle
(Figure 18-24, Page 18-16)
.
See
following CAUTION.
CAUTION
• Do not position fingers under motor when sliding motor off of the input shaft in step 9. Fingers may
get pinched when motor disengages.
10. Carefully slide the motor away from the transaxle until the motor spline disengages the input shaft and remove
the motor from the vehicle.
748
Figure 18-4
Speed Sensor Magnet
749
Figure 18-5
End Cap
MOTOR DISASSEMBLY
1.
Before beginning disassembly, place match marks on the motor end cap and motor frame.
2.
Remove speed sensor and magnet.
2.1. Remove the two screws (25) that secure the speed sensor (10) to the end cap (11)
(Figure 18-15, Page
18-11)
.
Page 18-4
2009 Electric Precedent Maintenance and Service Manual
