Clover CDR-1610, User Manual

Page: 9 / 79

■
Rear Panel
Figure 1-4: Rear Panel
11 10 9 8 7 6 5 4
3 2
1
Figure 1-4
1. Camera Input & Loop Output
2. Main Monitor
3. Power Input
4. VGA Monitor
5. S-VHS Monitor
6. Ethernet Port
7. RS-485 Port
8. Sensor Alarm Input
9. Control Relay Output
10. Mouse (P/S2)
11. Voltage Selector
■
Camera Connection
1. Camera Input
Connect the cameras to Video Input (BNC connector) on the back of the unit.
2. Loop Output
The Camera or video output is available from the Loop Output on the back of the
unit. When BNC jack is connected to the Video Output, the termination resistance
(75
Ω ) is automatically switched to impedance status so the external device must
have termination resistance
- 9 -