1. Lay one steel drawer side (3) face down
on a protected surface. Holding the
drawer bottom panel (4) vertically, align
two of its pre-drilled holes to the
corresponding holes along the drawer
side bottom flange.
2. Secure the drawer bottom to the steel
side panel, fastening two of the
#8 x 1/2” pan head screws provided
through the bottom of the steel side
panel flange up into the bottom panel.
(See Fig. 1.)
Fig. 1
3. Gently turn over the connected side and bot-
tom panels to the edge and align the remaining
drawer side to the corresponding two pre-drilled
holes. Fasten the bottom and side panel as in
step #2. (See Fig. 2.)
Fig. 2
4. Slide drawer back panel (5), with edgebanding
facing up, along the inside of the rear metal
flanges onto drawer bottom. (See Fig. 3.)
5. Secure the drawer back using two of the #8 x
1/2” pan head screws provided on each side
through the back of the steel side panel flange
into the back panel. (See Fig. 3 close up inset.)
Fig. 3
6.
Secure the drawer back (5) to the drawer
bottom (4), fastening the #8 x 1” screw
provided through the drawer box bottom up
into the edge of the back panel. (See Fig. 3.)
DESCRIPTION
Drawer Face(s)
Front Connectors
Steel Side Panels
Drawer Bottom Panel
Drawer Back Panel
Drawer Runners
#8 x 1/2” Pan Head Screws
#8 x 1” Pan Head Screws
Euro Screws
Drawer Face Bumpers
11-5/8” Fixed Cam Shelf
INST
ALLA
TION
Drawer
MULTI-SUITE SYSTEM ASSEMBLY
ASSSEMBL
Y ORDER
£
Hanging Cabinet
¢
Drawer Assembly
£
Door Installation
£
Counters & Slat
Wall
PAR
TS
72
