These instructions apply to assembly of either
1/2 or full island kits. Each 1/2 island has two
facing sides. A full island will have two (2) 1/2
islands connected to make a four facing sided
island.
Island units can have many designs, including
configurations for shelves, added doors,
drawers and baskets. The basic components’ kit
consists of the smooth-finished side panels,
divider, shelves, and toe-kicks. Heavy-duty
countertop is sold separately and is available
in either a 1/2 island size of a full island size.
PREP
ARA
TION
In addition, you must supply the
custom design components: adjustable
shelves, doors, drawers and baskets
to meet the customer’s needs.
LOCATION: As shown in Fig. 1,
the basic island, Full (2—25-1/2”
sections wide) or Half (1—25-1/2”
section wide) must be positioned
in the closet or pantry with a
minimum of 24” walking space
on all sides. More is better!
Islands with drawers or baskets
require 30” or more of space
between the island and hanging to
accommodate the pull-out
distance of the drawers or baskets.
Use the dimensions at right as a
minimum guide.
Fig. 1
PAR
TS
QTY. DESCRIPTION
1+ Island Kit (2 sides, 1 divider, 4 cam
shelves -for top and bottom, and
2 toe kicks for each 1/2 island)
30 Screw-in Studs #56544 (for each half island)
4 #4.5 X 32mm Screws
Island
ACCESSORY ASSEMBLY
63
ORDER OF ASSSEMBL
Y
£
Shelving /Towers
£
Drawers and
Doors
£
Top Shelves and Poles
£
Adjustable Shelves
£
Crown Molding
£
Baskets, Valet Rods,
Tie & Belt Racks, and
other accessories
¢
Islands
£
Benches
Full Island shown (with Bench)
