15.Before securing a continuous top shelf to each
partition, adjust the distance of the partitions
from the back wall by tightening or loosening
the Distance Screws. (See Fig. 6.) (This step
ensures the partition front edges are positioned
flush with the front edge of the top shelf.)
The end screw adjusts the bracket/partition’s closeness
to the wall (accommodating concave or convex drywall
shapes), and the bottom screw adjusts the bracket/
partition’s plumbness to the wall, tilting the partition to
or from plumb.
16.After making any final adjustments to the
brackets’/partitions’ distance, fasten the top
shelf to the top of each partition using two (2)
#8 x 1-1/4” screws.
17.
Secure each vertical partition by fastening an
angle (corner) bracket under each partition
using #8 x 1-1/4” screws through the bracket
into an Easy Anchor in the wall (or, w/o Easy
Anchor, into the stud). Then, fasten a #8 x 5/8”
screw from underneath through the Easy
Anchor into the partition bottom using a
90- degree angle drill. (See Fig. 7.)
18. After securing all partitions with corner
brackets, install the remaining accessories
(doors, drawers, shoe fences, sliding racks,
etc.).
Fig. 7
Hanging Tower System - 4
SHELVING/TOWER ASSEMBLY
28
