•
Cabinet Tower Doors must be
installed with a fixed shelf at both the
top and bottom of the door set.
•
Install all shelves first. Allow 18 holes
between shelves for 24" door. Allow
28 holes between shelves for 36" door.
Allow 43 holes between shelves for 55"
door.
PREP
ARA
TION
•
The distance from the vertical center of
the bottom fixed shelf to the vertical
center of the top fixed shelf totals
23-7/8” or 36“ for short and half-size
doors, and 55-7/16” for long doors.
1.
Assemble the tower to which you plan
to attach the cabinet doors.
INST
ALLA
TION
2.
In one hand hold the Door/Hamper
Template (#05-90051) against the left or
right partition and against the top shelf.
With your free hand, drill your hinge
holes, using the 5mm Self Centering Drill
Bit, through the Lucite Template. (Fig. 1.)
PAR
TS
QTY. DESCRIPTION
1 Set of Cabinet Tower Doors
2 Handles
4 Machine Screws
4 Mounting Plates
4 Hinges
Hole Sleeves & Mounting Bolts (
#56514
) – optional
Door/Hamper Template (#05-90051)
Door Handle Template (#05-90050)
Self Center Drill Bit (#05-11619)
•
For installation of full length doors, the middle
two hinges should be measured, drilled and
mounted
after
the door is mounted to the
panel with its top and bottom hinges.
3.
Repeat Step 2 for the remaining top location.
Then, hold the template against partition
and bottom fixed panel to drill bottom hinge
hole locations.
Fig. 1
Tower Doors
DOOR & DRAWER ASSEMBLY
52
ORDER OF ASSSEMBL
Y
£
Shelving /Towers
¢
Drawers and
Doors
£
Top Shelves and Poles
£
Adjustable Shelves
£
Crown Molding
£
Baskets, Valet Rods,
Tie & Belt Racks, and
other accessories
£
Islands
£
Benches
