43
3.10 PC adaptation
A connection between the welding power source and the software QDM
can be established using the Ethernet interface.
For the identification of the welding power source within the network, the
IP address and the Subnet mask have to be set.
1. Select and confirm a number field using the rotary knob.
•
The selected number field is highlighted yellow.
2. Select and confirm a number between 000 … 255 using the rotary knob.
3.11 Options
The chip code of the option chip and the activated options are displayed in
this menu.
If you want to activate additional options on your welding power source,
call the CLOOS service hotline with the chip code and the serial number of
the welding power source. You will then receive an activation code for a fee.
Installations or retrofitting of the welding power source may be necessary.
3.12 Activation code
By means of activation codes the software and machine configurations can
be released.
If all data is correct, the new activated option is listed in the survey "Acti-
vated options“.
If an error occurred during the transmission or input of the activation
code, the error message 317 appears "Wrong activation code!“. Review the
information and repeat the process.
