40
MA_QN_MP
Configuration operating panel
Options
Configure the user level "Automatic" in the submenu “Options”.
Function
Description
Locking status
"complete"
The active access to the menus and welding settings is
locked. The menus can only be opened and viewed.
"Release Fine"
Rotary knob for fine adjustment is released. The menus
are blocked.
Release
Fine, Power
Both rotary knobs are realised for capacity adjustment
and fine adjustment. The parameter adjustment of the
released rotary knobs is subject to the preset welding
parameter adjustment ranges.
The menus are blocked.
Call Job* / Call S1-S5
"locked"
The call up of the rapid memories / jobs* is blocked.
"allowed"
The call up of the rapid memories / jobs* is released..
Call Job* / Save S1-S5
"locked"
The storage on rapid memories / jobs* is blocked.
"allowed"
The storage on rapid memories / jobs* is released.
*If the option „Job memory MasterPlus“ is activated, the configuration
items "Call job" “ ("blocked" / "allowed") and "Save job" ("blocked" / "al-
lowed") are available.
Colour code of the login screen
When a user with the user level "Automatic" logs in to the welding power
source, the login screen changes the colour according to his restrictions.
A distinction is made between the following colours:
white
The user has access to all jobs within his allowed job range.
yellow
The user has only restricted access to
his allowed job range.
Call job or Save job is locked.
See “Options” on page 40.
red
The user has no access to his allowed
job range.
Call job or Save job is locked.
See “Options” on page 40.
NOTICE!
